Home / ESD Safe Bins / ESD-Safe Dividable Grid Containers

ESD-Safe Dividable Grid Containers

Conductive (ESD-safe) dividable grid containers for electronics assembly and kitting — every size on one page, priced per carton and per box.
← Not the right format? See all ESD-safe storage

Conductive throughout — carbon-filled copolymer polypropylene, not a coating
Surface resistivity less than 10⁵ ohms per square
Molded grid takes long & short dividers for compartments as small as 1-1/8" square
Stacks securely for bench, cart and shelf storage
Made in the USA
Free shipping · automatic volume discounts

Outside Length

Outside Width

Outside Height

Model	Outside Dimensions			Price Per Bin (Free Shipping)	Availability	Colors	Quantity	Add To Cart
Model	L"	W"	H"	Price Per Bin (Free Shipping)	Availability	Colors	Quantity	Add To Cart

ESD-Safe Dividable Grid Containers — Conductive Component Boxes for Electronics Assembly

These are Quantum's conductive dividable grid containers — the static-safe divider box the people who build and repair boards reach for when loose components need their own compartment. Every box is molded from carbon-filled copolymer polypropylene, so the whole container, not just a surface coating, carries static charge safely away instead of letting it build up on the parts inside. Surface resistivity is less than 10⁵ ohms per square, the conductive range, which protects ICs, bare and populated PCBs, connectors, and other static-sensitive components from electrostatic discharge, EMI, and induced fields.

The molded interior grid accepts long dividers (DL) and short dividers (DS) that drop into slots both lengthwise and widthwise, so you can split one box into compartments as small as 1-1/8" square and re-lay them out whenever a build changes. Boxes stack squarely on top of each other, so you can hold a static-controlled flow from the stockroom to the SMT line to rework and kitting on one footprint. Made in the USA and sold by the carton, in 11 sizes across three footprints — roughly 11" x 8", 16-1/2" x 10-7/8", and 22-1/2" x 17-1/2" — in several heights. Dividers are sold separately so you buy only the configuration each box needs.

Specifications

Material	Carbon-filled copolymer polypropylene — conductive throughout the box, not a surface coating
Surface Resistivity	Less than 10⁵ ohms per square (conductive range)
Protects Against	Electrostatic discharge (ESD), electromagnetic interference (EMI), and induced fields
Compartments	Molded interior grid accepts long (DL) and short (DS) dividers lengthwise and widthwise — compartments as small as 1-1/8" square
Mounting	Stacks securely for benchtop, cart, and shelf storage
Size Range	11 sizes across three footprints — 10-7/8"L × 8-1/4"W × 2-1/2"H up to 22-1/2"L × 17-1/2"W × 12"H
Accessories	Long and short dividers (DL / DS), snap-on covers, clear dust-cover inlays, and clear label holders sold separately
Packaging	Sold by the carton (packs of 3 to 20 depending on size); table price is per carton with per-box price shown
Origin	Made in the USA

11Sizes In Stock

<10⁵ Ω/sqSurface Resistivity

USAMade in the USA

FreeShipping on All Orders

Built for Electronics Assembly

Component Kitting

Divider boxes are the natural kit tray for electronics work. Give every IC, connector, fastener, and subassembly its own compartment, then hand the whole static-safe box to the line so a build travels in one container — no charge reaching the parts along the way.

SMT & Hand-Solder Benches

Keep loose components and hardware sorted and within reach at pick, placement, and hand-solder stations. Compartments as small as 1-1/8" square keep small parts from mixing, static-safe the whole way down the line.

Repair & Failure-Analysis Labs

Organize pulled components, spares, and devices under test in separated slots without risking a static event. Reconfigure the dividers as a job changes, and add a label holder to keep serialized parts identified.

Stockroom & WIP Transport

Move bare and populated boards, ICs, and connectors between the stockroom, SMT line, rework, and test in a box that won't charge the parts it protects. Boxes stack, and snap-on covers keep dust and debris out in transit.

Standardizing a Line or Stocking a Facility? Get a Volume Quote

Tiered pricing on carton and pallet quantities for EMS, contract manufacturers, and in-house electronics assembly. Send your sizes and quantities — most quotes come back the same business day. Purchase orders accepted.

Request Bulk Quote

Frequently Asked Questions

They are molded from carbon-filled copolymer polypropylene, so the entire box is conductive and carries static charge safely away instead of letting it build up. Surface resistivity is less than 10⁵ ohms per square — the conductive range — which protects ICs, boards, and other static-sensitive components from electrostatic discharge, EMI, and induced fields.

These are conductive boxes, with surface resistivity below 10⁵ ohms per square. Conductive plastic moves charge quickly to ground, which is what most PCB assembly, SMT, and component-handling programs specify for bins and totes at the bench. If your process documents call out a specific resistivity range, confirm it against this spec before you standardize.

Each box has a molded interior grid that accepts long dividers (DL) and short dividers (DS). They drop into slots both lengthwise and widthwise, letting you build compartments as small as 1-1/8" square and re-lay them out whenever a job changes. Dividers are conductive like the box and are sold separately, so you buy only the layout each container needs.

Optional snap-on covers and clear dust-cover inlays protect contents from dust and debris in storage and transit, and clear label holders keep compartments identified. These accessories are sold separately.

11 sizes across three footprints — about 11" x 8", 16-1/2" x 10-7/8", and 22-1/2" x 17-1/2" — in several heights, from 10-7/8" x 8-1/4" x 2-1/2" up to 22-1/2" x 17-1/2" x 12". Use the Outside Length, Width, and Height filters above the table to narrow to what fits your bench, cart, or shelf, and open the quick view on any row for inside dimensions.

By the carton — packs of 3 to 20 depending on size. The table shows the carton price and the per-box price, and quantities are entered in cartons. Volume discounts apply automatically in the cart: 5% off orders over $1,000 and 10% off over $2,500.

Yes. These conductive dividable grid containers are made in the USA by Quantum Storage Systems.